Coincident glutamatergic depolarization effects on Cl- dynamics (Lombardi et al, 2021)

 Download zip file   Auto-launch 
Help downloading and running models
"... we used compartmental biophysical models of Cl- dynamics simulating either a simple ball-and-stick topology or a reconstructed CA3 neuron. These computational experiments demonstrated that glutamatergic co-stimulation enhances GABA receptor-mediated Cl- influx at low and attenuates or reverses the Cl- efflux at high initial [Cl-]i. The size of glutamatergic influence on GABAergic Cl--fluxes depends on the conductance, decay kinetics, and localization of glutamatergic inputs. Surprisingly, the glutamatergic shift in GABAergic Cl--fluxes is invariant to latencies between GABAergic and glutamatergic inputs over a substantial interval..."
1 . Lombardi A, Jedlicka P, Luhmann HJ, Kilb W (2021) Coincident glutamatergic depolarizations enhance GABAA receptor-dependent Cl- influx in mature and suppress Cl- efflux in immature neurons PLOS Comp Bio
Citations  Citation Browser
Model Information (Click on a link to find other models with that property)
Model Type: Synapse; Dendrite;
Brain Region(s)/Organism:
Cell Type(s): Hippocampus CA3 pyramidal GLU cell;
Gap Junctions:
Receptor(s): GabaA; AMPA; NMDA;
Transmitter(s): Gaba; Glutamate;
Simulation Environment: NEURON;
Model Concept(s): Short-term Synaptic Plasticity; Synaptic Plasticity; Chloride regulation;
Implementer(s): Jedlicka, Peter [jedlicka at]; Kilb, Werner [wkilb at];
Search NeuronDB for information about:  Hippocampus CA3 pyramidal GLU cell; GabaA; AMPA; NMDA; Gaba; Glutamate;
_For Zip -Neuron-Models_AMPA-GABA
cldif_CA3_NKCC1_HCO3.mod *
gabaA_Cl_HCO3.mod *
SynExp2NMDA.mod *
vecevent.mod *
Cell1_Cl_HCO3_Pas_fine.hoc * * *
TITLE dual-exponential model of NMDA receptors

Classic double-exponential model of NMDAR 
Mg++ voltage dependency from Spruston95 -> Woodhull, 1973 
Keivan Moradi 2011

--- (and now back to the original exp2syn comments) ---

Two state kinetic scheme synapse described by rise time tau1,
and decay time constant tau2. The normalized peak condunductance is 1.
Decay time MUST be greater than rise time.

The solution of A->G->bath with rate constants 1/tau1 and 1/tau2 is
 A = a*exp(-t/tau1) and
 G = a*tau2/(tau2-tau1)*(-exp(-t/tau1) + exp(-t/tau2))
	where tau1 < tau2

If tau2-tau1 -> 0 then we have a alphasynapse.
and if tau1 -> 0 then we have just single exponential decay.

The factor is evaluated in the
initial block such that an event of weight 1 generates a
peak conductance of 1.

In the initial block we initialize the factor and total and A and B to starting values. The factor is 
defined in terms of tp, a local variable which defined the time of the peak of the function as 
determined by the tau1 and tau2.  tp is the maximum of the function exp(-t/tau2) – exp(-t/tau1).  To 
verify this for yourself, take the derivative, set it to 0 and solve for t.  The result is tp as defined 
here. Factor is the value of this function at time tp, and 1/factor is the normalization applied so 
that the peak is 1.  Then the synaptic weight determines the maximum synaptic conductance.

Because the solution is a sum of exponentials, the
coupled equations can be solved as a pair of independent equations
by the more efficient cnexp method. 


	RANGE tau1, tau2, e, i, Mg, K0, delta, wf

	(nA) = (nanoamp)
	(mV) = (millivolt)
	(uS) = (microsiemens)
	(mM) = (milli/liter)
	(S)  = (siemens)
	(pS) = (picosiemens)
	(um) = (micron)
	(J)  = (joules)

: Parameters Control Neurotransmitter and Voltage-dependent gating of NMDAR
	tau1 = 8.8		(ms)	<1e-9,1e9>	: Spruston95 CA1 dend [at Mg = 0 v=-80]	becarful: Mg can change these values
	tau2 = 500		(ms)
: Parameters Control voltage-dependent gating of NMDAR
	celsius 		(degC)	: actual temperature for simulation, defined in Neuron, usually about 35
: Parameters Control Mg block of NMDAR
	Mg = 1			(mM)	: external magnesium concentration from Spruston95
	K0 = 4.1		(mM)	: IC50 at 0 mV from Spruston95
	delta = 0.8 	(1)		: the electrical distance of the Mg2+ binding site from the outside of the membrane from Spruston95
: Parameter Controls Ohm's law in NMDAR
	e = -0.7		(mV)	: in CA1-CA3 region = -0.7 from Spruston95

	T = 273.16	(degC)
	F = 9.648e4	(coul)	: Faraday's constant (coulombs/mol)
	R = 8.315	(J/degC): universal gas constant (joules/mol/K)
	z = 2		(1)		: valency of Mg2+

	v		(mV)
	dt		(ms)
	i		(nA)


	if (tau1/tau2 > .9999) {
		tau1 = .9999*tau2
	A = 0
	B = 0
	tp = (tau1*tau2)/(tau2 - tau1) * log(tau2/tau1)
	factor = -exp(-tp/tau1) + exp(-tp/tau2)
	factor = 1/factor
	wf = 1

	SOLVE state METHOD cnexp

	i = (B - A)*Mgblock(v)*(v - e)

	A' = -A/tau1
	B' = -B/tau2

NET_RECEIVE(weight) {
	wf = weight*factor
	A = A + wf
	B = B + wf

FUNCTION Mgblock(v(mV)) {
	: from Spruston95
	Mgblock = 1 / (1 + (Mg/K0)*exp((0.001)*(-z)*delta*F*v/R/(T+celsius)))